Universal Tool
Universal Tool UT8711-T - Precision Turbine Grinder, 100,000 RPM
Universal Tool UT8711-T - Precision Turbine Grinder, 100,000 RPM
Couldn't load pickup availability
Universal Tool UT8711-T — Precision Turbine Grinder
Specialized precision turbine grinder for controlled intricate deburring and detailed finishing. One boxed unit is pictured in Arclight clearance stock. Verify approved accessory mounting and speed ratings before use.
Verified UT8711-T technical specifications
| Motor | 0.06 HP |
| Free speed | 100,000 RPM |
| Collet | 1/8 in. |
| Maximum wheel diameter | 3/16 in. |
| Recommended pressure | 90 PSI (6.2 bar) |
| Air consumption | 7 CFM maximum; 1 CFM average |
| Exhaust | Front |
| Body | Low-vibration aluminum housing |
| Lubrication | Oil-free; do not use inline lubricator |
Best applications and accessories
High-speed precision finishing, fine deburring and edge cleanup in aerospace, turbine and mold maintenance environments. Select only manufacturer-approved 1/8-in-shank precision accessories with the permitted working-end diameter and ratings for 100,000 RPM. This grinder is not suitable for ordinary die-grinder wheels, 1/4-in-shank burrs or standard sanding discs.
Air supply: Manufacturer specifies 3/16-in internal-diameter air hose, maximum 25 ft, and specifically warns against lubrication of the tool or an inline lubricator. Follow the official UT8711-T instruction manual.
Additional tools, accessories and pricing available upon request. Contact Arclight for approved accessory sourcing and bundle pricing. Aerospace suitability must be evaluated against the applicable maintenance procedure.
Which Universal Tool grinder is right for the job?
Compare the tools by application and accessory type. All accessories are sold separately and must be approved for the actual tool and operating speed.
| Model | Tool | Compatible accessory category* | Typical work |
|---|---|---|---|
| UT8710-25 | 1/4-in straight die grinder | Shank-mounted carbide burrs, approved mounted stones | Detailed deburring, weld edges |
| UT8724 | 1/4-in die grinder | Compatible burrs and mounted abrasives | Precision grinding and controlled finishing |
| UT8724-20 | 1/4-in angle die grinder | Compatible small mounted abrasives | Tight-access deburring and finishing |
| UT8724T-20 | 1/4-in angle die grinder, distinct T model | Manufacturer-approved holders and abrasives; confirm mount | Tight-access grinding and surface blending |
| UT8780-1 / UT9750A | 4-1/2-in angle grinder | Approved guarded 4-1/2-in grinding and flap wheels | Weld cleanup and broad surface prep |
| UT8784-5 | 5-in angle grinder | Approved guarded 5-in grinding and flap wheels | Fabrication, heavier grinding and surface prep |
| UT8711-T | Precision turbine grinder | Manufacturer-approved miniature burrs or grinding points; verify exact holder and RPM | Fine deburring and intricate finishing |
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
Care Instructions
Care Instructions
